Keep Calm And Fix VGA No Signal Asus Issue Easily 

Last Updated on July 28, 2022

If you have read my earlier articles, you will know. I have already written about different monitors not getting signal due to cable problems. VGA no signal Asus is like those problems. 

When this problem occurs, your screen goes black. Sometimes it just shows the error message in a black box, and you can operate the monitor normally. But the box is so irritating. 

Like any other cable problem, it is also solvable. Nothing is out of your hand. Even if you are not good with computers, you will be able to solve. Just follow my guidelines. The solutions are also applicable for HDMI issues.  

With no further a due, let’s get rid of this irritating black box from your Asus monitor. 

Vga No Signal Asus; Addressing The Problems 

Knowing your problem leads you one step closer to the solutions. 

Let’s see what problems can cause this issue. 

  • Shortage of power supply 
  • Poor port+cable connection
  • Incorrect plugin 
  • Sleep/power saving mode
  • Outdated drivers 
  • Incorrect input source 
  • Faulty cable or port 
  • Defected monitor 

The solutions to these problems are simple. For example, you must change the power outlet if you have a poor power supply. 

You can solve this problem by ensuring a stable power supply, correct port+cable connection, removing sleeping/power saving mode, updating the outdated drivers, and replacing the faulty cable. 

No worries. I’m not leaving you just here. Now I will show you the solutions in detail.  

Asus Monitor VGA No Signal; Solutions 

I have already given you hits regarding what you can do about this problem. 

Firstly, you need to check the connections very well. Secondly, reset the monitor and update the drivers. Finally, replace the cable or monitor if they come out defective.

Let’s have a quick look at the stages and actions. 

Stages  Actions 
Initial 
  • Check the power supply 
  • Check the connection 
  • Check the ports 
  • Check the cables 
  • Check the modes 
Secondary 
  • Restart the monitor 
  • Reset the whole system 
  • Update the drivers 
  • Change the refresh rate 
Final 
  • Go to the service center 

Now let’s dive into the detailed action. 

Check The Power Source 

Does your computer get a proper power supply? 

Not getting a stable power supply not only causes VGA no signal but also interrupts other operations. If you are using multi-monitors, the possibility increases. 

Connect your monitor to another outlet or socket. If it works fine, you must change your outlet as soon as possible. I know changing an outlet means changing places and setups etc., but for the sake of your PC, you need to do it. 

If you are using a multiplug, ensure it has the capability to handle all your devices. Also, check if it’s faulty or not. 

You can test the power outlet with the help of a multimeter. Here are some videos on how you can test your outlets. 

https://www.youtube.com/watch?v=os2sWYz74h4 

https://www.youtube.com/watch?v=j-FY-Merkd8 

https://www.youtube.com/watch?v=cXlVVgsp64c 

Check The Port+Cable Connection 

Go to the back of your monitor and find out if there is any loose connection between the wires. These happened to me once. My VGA cable was pulled a little by my leg. Then my screen went black. 

So, check whether if the cables are inserted into the port correctly or not. Pull out the cable and insert it again if needed. 

Do You Know The Ports And Cable? 

VGA ports and cables are easy to recognize. They are pretty large than the other ports like HDMI. The pictures will give you a clear idea. 

The VGA port has fifteen holes, and the cable has fifteen spicks. Make sure you plugged in the correct cable to the correct port. 

Check For Damages 

When checking the connections, check the port and cable. 

A damaged port or cable is responsible for no signal on your Asus monitor. If the port is damaged, you must take it to the service center as soon as possible. 

In the case of the cable, borrow a VGA cable from your friend and try it on your monitor. If it works, then your VGA cable is damaged. 

There are some hacks on how you can fix your broken cable. But I don’t suggest those to try. The poorly fixed cable can cause more trouble in no time. 

So, buy a new cable. It will not cost more than the trouble you will have if you use a poorly fixed cable. You can find new authentic cables from Asus Accessories. Also, Amazon is always there for you. 

Is Your Monitor Sleeping? 

Sometimes, there could be no cable issue. Simply your monitor can be on sleep mode or power-saving mode. 

To wake your monitor from hibernation, do any of these:

  • Move the mouse 
  • Press any key 
  • Press and hold any key 
  • Press the power button. 

If your monitor is inactive for a specific time, it tends to go into power-saving mode. Here’s a video tutorial on adjusting the settings. 

https://www.youtube.com/watch?v=cxSN5i59rno 

Perform A Complete Reset. 

I am talking about both software and hardware reset. 

Firstly, just restart or reboot your computer like regular time. If this does not work, you must perform a full reset. 

To perform a full reset, 

  • Unplug the power cord from the outlet 
  • unplug every cable from the monitor
  • Unplug every cable from the PC 
  • Wait around five minutes 
  • Replug everything.  

If you do this, your computer will perform better than before. Even without any problem, I recommend doing this at least once a week. Your PC needs a break too. 

Hopefully, this full reset will solve your problem. If it fails, then consider giving your monitor a factory reset. 

How To Perform A Factory Reset On An Asus Monitor? 

  • Press the Menu key under the monitor 
  • the  Monitor Setup window will open 
  • Select the Menu again
  • Tap on the down arrow button
  • It will highlight the Factory Reset 
  • Press any arrow button to select Yes
  • Press Menu to reset the settings

Watch the video tutorial for a better understanding. 

https://www.youtube.com/watch?v=IlySLt3Zq_I  

Stay Updated With Your Drivers 

Outdated graphics drivers are also responsible for getting no signal. So, update your graphics driver. 

As you update the graphics driver, how about you check the other drivers? 

Driver Easy or Auslogics Driver Updater is such an applications that can make half your task. These applications will scan your PC and show you all the outdated drivers.

From the list, you can manually select and update certain drivers. Also, you have an update all option to update all the drivers at once. 

How To Update Drivers On The Asus Computer? 

  • Download Driver Easy 
  • Install and run the application
  • Press on the Scan Now button 
  • From the list, choose graphics driver 
  • Hit on the Update button beside it
  • Or hit the Update All button 

Or you can download Auslogics Driver Updater and let the application do the updating for you. The process is the same as the above. 

Change Your Refresh Rate  

Another solution is changing the refreshing rate setting. An inappropriate refresh rate can cause trouble for the stable cable signal.

Here’s how you can change your refresh rate 

  • Go to the settings option from the start option 
  • Press on the System option 
  • Now select the Display option 
  • Click on the Advanced display settings option
  • Select the Display adapter properties option
  • Navigate the drop-down menu 
  • Select the refresh rate you want to set
  • Tap on the OK and Apply button

Run To The Service Center 

These are the solutions you can perform at home by yourself. If all of these fail, you have one final action to take. And it is to go to the service center. 

Before going to the service center, ensure that your monitor is the problem. Take your monitor to another CPU and connect. If the monitor does not wake, it is faulty. 

Hopefully, any of the solutions above will work. I tried to gather and present all the possible solutions before you. If you go through Quora and Reddit, you will find the exact solutions here and there.

People Often Ask 

Why Did My Asus Monitor Screen Turn Black?

This can happen for several reasons. Your monitor might go to sleep, hibernation, or power-saving mode. Also, faulty HDMI or VGA cables can cause trouble. 

What Causes No Signal To The Asus Monitor? 

Poor power supply, connection, faulty cables, and defective ports can cause this problem. Also, simply your monitor can be in power saving mood or hibernation. 

How Can I Know My VGA Cable Is Faulty?

You can try another cable with your monitor. Borrow a cable from your friend and try it with your monitor. If it works, then your cable is faulty for sure. 

Can The Use Of Multiple Monitors Cause No Signal? 

There should not be an issue with using multiple monitors. If the poor supply is poor, it can cause trouble. Also, faulty cables or ports can cause no signal issue.

How To Fix The Black Screen On The Asus Monitor? 

Change the outlet and ensure proper cable+port connections. Also, update your outdated drivers. Find out if the cables are faulty, then change them. 

Solved The Issue With A Snap! 

The solutions here are familiar for those who have previously faced the HDMI no signal or cable not connected issue. Read my article to learn about different ports and HDMI issues. So that you can see, the solutions are pretty similar. 

However, knowing the specific port and cable type helps a lot. In the future, if you have trouble like this, you can follow the steps I gave. Hopefully, you will not mistake the correct port and cable connection again. 

Usually, you can apply these solutions to any cable-related problem. VGA no signal Asus issue is nothing to worry about. Do some checking, updating, or fixings and solve the problem quickly.