Renova Zero Not Working (Fixed): The Unbothered Experience

The Vaporesso Renova Zero kit is a fantastic choice if you want to quit smoking. Therefore, if you are a vaper using Renova 0% nicotine e-liquid, you may be experiencing some problems.

When you face a Renova Zero not working issue, the problem might be a damaged coil, battery, less e-juice, or even a lack of charge. Adequate charging, the right vape juice, and replacing the damaged parts may solve your problem. Proper upkeep of the PCTG refillable pod is also a viable solution.

So before you go out and buy another one, we have some things to save your expense. Let’s move forward to look into the solutions!

Renova Zero


Why Is The Renova Zero Not Working? Possible Causalities With Resolutions

There are several reasons why your Vaporesso Renova Zero may not be working correctly. Sometimes, there can be internal component issues that require some attention to get fixed. Now we will look into the reasons and possible solutions.

1. Coil Issues

The pod system may fail to work when there are any coil issues. When the Vaporesso Renova Zero device is not working due to coil issues, here are a few things you can do:


  • Make Sure Of Accurate Placement: 

Make sure that it is seated correctly in the device. If it’s not, this can cause problems with firing and produce an unpleasant taste.

  • Checking For Loose Connections: 

Check the connections between the coil and the device to ensure they’re secure. If they’re loose, this can also cause firing issues and produce an unpleasant taste.

  • Taking Care Of The Worn Out Coil:

If the device is used for a while, the coil might be worn out. When it is worn out, you must replace it to get your vape working again.

Battery Issues

2. Battery Issues

A damaged or faulty battery is another common problem that makes the device stop working. If the battery causes the issue, here are a few resolutions to take:


  • Make sure that the batteries are correctly installed and seated.
  • Try using fresh, high-quality batteries.
  • If you’re using rechargeable batteries, make sure they’re fully charged.
  • The connections between the battery and coil may be loose. Try tightening the connections to see if that fixes the problem.
  • If nothing else works, try replacing the battery to see if that fixes the problem.


3. Loose Connection

It could be due to a loose connection if you’re having trouble with your Renova Zero. Try the following steps to see if that fixes the problem:


  • Proper Placement:

Check that the Renova Zero is correctly seated in the charging dock. Make sure that no dust or debris is blocking the connection. Try removing and re-inserting the Renova Zero into the charging dock.

  • Resolving Port Issues

If you’re using a micro USB extension cable, try removing it and connecting the Renova Zero directly to your computer’s USB port. Make sure that you’re using the included Renova Zero USB cable. Other cables may not work correctly.

Savior Tips Before You Replace The Vape:

  • Make sure the Renova Zero is adequately charged. If the battery is low, it may not have enough power to operate.
  • Check that the Renova Zero is turned on. Sometimes the device can accidentally get turned off, so this is a simple thing to check.
  • If the Renova Zero still isn’t working, there may be an issue with the cartridge. Try removing and re-inserting the cartridge to see if that fixes the problem.

When your Vaporesso Renova Zero kit is not working, the earlier solutions may just give you the correct lead. But apart from the not working issue, other problems may bother you with this pod system. Now we will move forward with those!


Other Renova Zero Issues And Solutions

Problem  Solution 
Less Vapor Production Charge the battery or replace the battery.
Leaking Correctly install the o-rings, seals, and gaskets, and tightly screw the coil.
Dry Hits Fill the device with e-liquid and prime the wick before use.
Firing Issues Check the battery and connections.
Spitting Do not overfill the atomizer.


1. Less Vapor Production

This can result from several different factors, such as not priming the device properly, not using the correct coil, or not filling the tank correctly.

You can face less vapor production when the battery is not full. The Renova Zero has a built-in battery integrated 650mah rechargeable battery; make sure that it is fully charged before use.

Renova Zero is leaking

2. Leaking

One of the most common issues people face with their Renova Zero is leaking from the juice head. The most common reason is that the o-rings, seals, or gaskets are not properly installed or seated. 

Another reason could be that the tank is overfilled, and the pressure is causing the e-liquid to leak out. Finally, the coil might not be screwed in tightly enough.

To fix a leaking Renova Zero, install the o-rings, seals, and gaskets properly. If they seem to be in place, check the tank to see if it is overfilled. 

Finally, if the coil is not screwed in tightly enough, unscrew it and screw it back in until it is snug.

3. Dry Hits

Another common issue with the Renova Zero is dry hits. This happens when the wick inside the atomizer isn’t appropriately saturated and can result in a nasty, burnt taste.

To avoid this, always keep your Renova Zero device filled with e-liquid and prime the wick before use.

Renovo Zero That Won't Smoke

4. Firing Issues

Sometimes, you may face firing issues with the PCTG pod. This can be caused by several things, including a dead battery, loose connections, or liquid getting into the firing mechanism.

If you’re having firing issues, check the battery and connections to get a solution.

5. Spitting

Spitting can be a common issue with Renova Zeros and can happen for many reasons. Sometimes, it’s due to incorrect wicking, while other times, it could be due to the atomizer being overfilled.

6. The Pod Is Not Hitting

There could be a few reasons your Renova Zero pods are not hitting as they should. Maybe the PCTG refillable pod isn’t properly seated in the device, or the airflow isn’t set correctly. Check out these tips to see if you can get your PCTG refillable pod hitting as it should.

  • Make sure the replacement pod is properly seated in the device. 
  • Check the airflow. If it’s set too low, you won’t get enough vapor. 
  • Make sure the mesh coil is primed correctly. 
  • Try a different ceramic coil. You won’t get a satisfactory hit if the mesh coil is bad.
  • Clean the contacts. 

7. The Device Flashing And Not Hitting

There are a few reasons your Renova Zero pod may be flashing and not hitting. First, make sure that the pod is properly inserted into the device. If the pod kit is not properly inserted, the device will not be able to read the pod, and it will flash.

Second, check to see if the pod is damaged. If the pod is damaged, it will not be able to function properly. Finally, make sure that the device is properly charged. If the device is not charged, it will not be able to power the Renova Zero pod.

Renovo Zero That Won't Smoke

How Do You Fix A Renovo Zero That Won’t Smoke?

There are a few things that could be causing your Renova Zero to not smoke. The most common issue is that the battery is not charged. If your Renova Zero has a built-in battery, ensure it is fully charged before use.

Another possibility is that the heating element is not working properly. If the heating element is not getting hot enough, the Renova Zero will not produce smoke. Try priming the heating element by taking a few puffs without activating the heating element.

If this does not work, try cleaning the heating element with a cotton swab dipped in isopropyl alcohol.

Extended Information Explored!

Can You Use Regular Vape Juice In A Renova Zero?

Yes, you can. The zero pods support any kind of e-juice. So you can use any vape juice with nicotine, even nicotine salts.

How Long Do Renova Zero Last?

You can expect to use the device for the whole day with one charge. It takes 45 minutes to charge fully. And the mesh pod has a life expectancy of 5 fills. To get the right taste, you must change the pods after every five refills.

What Happens If You Put Salt NIC In A Renova Zero Vape?

You can taste salt NIC in your Renova Zero without any issues. It supports any kind of vape juice, so you have nothing to worry about while using nic salt!

What Does The Button On A Zero Vape Do?

The button indicates the battery level and lights up when inhaling the vape. It also indicates when the battery is low and changes color, corresponding to the remaining battery power.

Leading To The Closure

So, that’s where we are with the Renova Zero not working solutions. As we have shown you how to fix common problems and make sure your e-cigarette is always working at its best, hopefully, now you can enjoy vaping more!

If your Renova Zero still does not work properly after trying the troubleshooting tips, please contact customer service or the vape shop for further assistance.


Leave a Comment