6 Methods To Fix The Input Signal Out of Range Error On HP Monitor Issue!

Last Updated on July 31, 2022

When you turn on your computer and the HP monitor screen is black, a blinking orange light at the bottom right corner of the screen is usually an indication that the input signal out of range HP monitor.

Either your graphics card or cable isn’t sending a signal the monitor can understand. But there are also some alternative ways to fix this issue. They are 

  • Run The Device Manager On Safe ModeUpdate the Monitor’s Drivers
  • Change the Monitor’s Video Resolution & Refresh Rate
  • Reinstall the graphics driver
  • BIOS Update
  • Check Hardware Failure

In this post, I’ll show you how to troubleshoot and fix this problem.

Causes of Input Signal Out of Range Error On HP Monitor

The HP monitor is a trendy brand of a computer monitor. Many people use it because of its good quality and reasonable price. 

However, some users have complained about an error called “input signal out of range.” This error usually appears when the user tries to change the resolution or refresh rate of the monitor.

There are a few common causes of this error:

Unsupported Resolution Or Refresh Rate

The most common cause is that the monitor does not support the resolution or refresh rate you are trying to use. This can happen if you try to use a high resolution or refresh rate not listed in the monitor’s specifications.

Faulty Cables

Another common cause is that the cable that connects the monitor to the computer is not properly connected. Make sure that the cable is firmly plugged in at both ends.

Outdated Drivers

Another possibility is that the drivers for the monitor are not installed correctly. You can try reinstalling the drivers from the website of the manufacturer of the monitor.

Finally, this error can also occur if there is a problem with the monitor itself. 

How To Fix The Input Signal Out Of Range On HP Monitor?

Method 1: Run The Device Manager On Safe Mode

If you are getting the “input signal out of range” error on your HP monitor, it may be due to a problem with the drivers. You can try running the Device Manager in Safe Mode to see if this fixes the issue.

  1. Boot into Safe Mode by pressing F8 while your computer is booting up.
  2. Once in Safe Mode, go to Start > Programs > Accessories > System Tools > Device Manager.

Run The Device Manager On Safe Mode

3. In the Device Manager, expand the “Display adapters” section and right-click on your graphics card.

Display adapters

  1. Select “Properties” and then go to the “Driver” tab.
  2. Click “Update Driver” and follow the prompts to install the updated driver.

Update Driver"

  1. Reboot your computer and see if the problem has been fixed.

Method 2: Update the Monitor’s Drivers

If you’re still getting an “Input Signal Out of Range” error on your HP monitor, it’s likely that the resolution you have set in Windows is too high for the monitor. To fix this, you’ll need to update your monitor’s driver.

To do this, follow these steps:

  1. Right-click on the “My Computer” icon and select “Properties.”
  2. Click the “Hardware” tab and the “Device Manager” button.
  3. Find the “Monitors” section and expand it.

Update the Monitor's Drivers

  1. Right-click on your HP monitor’s entry and select “Update Driver Software.”

Update Driver Software

  1. Select “Search automatically for updated driver software.”

Windows will now search for and install the latest driver for your HP monitor. Once that’s done, the “Input Signal Out of Range” error should be gone.

Method 3: Change the Monitor’s Video Resolution & Refresh Rate

If you see the error message “Input Signal Out of Range,” your monitor receives a signal outside its operating range. 

Several things can cause this, but the most likely cause is that your graphics card is set to output a resolution or refresh rate that is too high for your monitor.

To fix this, you will need to change the settings in your graphics control panel. 

  • If you are using an NVIDIA card, this can be done by opening the NVIDIA Control Panel and navigating to “Display”> “Change resolution.” 
  • You will want to set the resolution to a lower setting, such as 1280×720 or 1024×768.
  • You may also need to lower refresh rates, such as 60Hz or 75Hz.

60Hz or 75Hz

If you are using an AMD card, the process is similar. 

  • Open the AMD Catalyst Control Center and navigate to “Common”> “Display.” You will want to set the resolution and refresh rate lower.
  • Once you have made the changes, restart your computer and try relaunching the game or application. 

If the problem persists, you may need to uninstall and reinstall your graphics drivers. 

Method 4: Reinstall the graphics driver

If you have an HP monitor, you might have issues with the input signal being out of range. This can happen for various reasons, but the most common one is simply because the drivers for your graphics card are outdated. 

The good news is that it’s straightforward to reinstall the drivers for your graphics card, & I’ll show you how.

  • First, you’ll need to download the latest drivers for your graphics card from the manufacturer’s website. 
  • Once you’ve done that, open up Device Manager by pressing Windows key + X and 
  • Select “Device Manager” from the menu.
  • Next, find the “Display adapters” section and expand it. 
  • Right-click on your graphics card and select “Uninstall device.”

Uninstall device

Now, restart your computer and install the new drivers you downloaded. Once that’s done, your problem should be fixed!

Method 5: BIOS Update

If you’re still having trouble, you can try updating your BIOS. This is usually only necessary if you’re using an older graphics card, but it’s worth a shot if nothing else is working.

To update your BIOS, you’ll need to find out what version you’re currently running. 

  • You can do this by opening the BIOS menu and looking for the “Version” or “BIOS Version” entry.
  • Once you know what version you’re running, head over to the manufacturer’s website and download the latest BIOS update for your model. 
  • Once you’ve downloaded it, run the BIOS update utility and follow the instructions.
  • Afterward, restart your computer and try relaunching the game. 
  • You can try contacting HP support for more help if you’re still having trouble.

Method 6: Check Hardware Failure

If the monitor displays an image that is out of range, it can be caused by a hardware failure. Try the following steps to fix the issue:

First, check the input signal on the monitor. If the signal is out of range, it can cause the monitor to display an image that is out of range.

Second, try resetting the monitor. To do this, unplug the power cord from the monitor and then plug it back in.

Third, try connecting the monitor to a different computer. If the issue is not with the monitor, it is likely a problem with the computer.

Fourth, try using a different cable to connect the monitor to the computer. If the cable is causing the issue, then you will need to replace it.

Fifth, check the settings on the monitor. If the settings are incorrect, it can cause the monitor to display an image that is out of range.

Sixth, try updating the drivers for the monitor. If the drivers are out of date, it can cause the monitor to display an image that is out of range.

Why does my HP monitor keep going on and off?

There are a few reasons why your HP monitor may keep going on and off. Here are some possible causes:

  1. The monitor is not getting enough power. Ensure the power cord is plugged into a working outlet and the monitor is turned on.
  2. The monitor is not getting a signal from the computer. Ensure the video cable is correctly connected to the computer and the monitor.
  3. The monitor is not correctly configured. Go into the monitor’s menu and make sure that the correct input mode is selected.
  4. The monitor is defective. If none of the above solutions work, the monitor may be defective and need to be replaced.

What To Do If The Input Signal Out Of Range On Second Monitor?

If you have a second monitor and it’s not displaying anything, or if the image on the screen is “out of range,” there are a few things you can do to fix the problem.

First, check the connection between the monitor and the computer. Make sure the cable is plugged in securely at both ends.

Next, check the settings on the monitor itself. Many monitors have an “auto-adjust” feature that will correct the image if it’s not centered correctly.

If neither of those solutions works, you may need to adjust your computer’s display options settings. To do this, go to the “Control Panel” and then click on “Display.”

Under the “Settings” tab, look for the section labeled “Resolution.” Change the resolution to a lower setting, and click “Apply.”

Why is the HP monitor display going to sleep?

The input signal out-of-range error may occur if your HP monitor’s refresh rate is too high. This can happen if you’ve recently installed a new graphics card or updated your drivers. To fix this, lower the refresh rate on your monitor.

If you’re still seeing the input signal out of range error, your monitor may be set to go to sleep after a certain period of inactivity. This power-saving feature can be disabled in the monitor’s settings menu.

What To Do: Showing input signal out of range On HP monitor while Playing Xbox?

If you see the message “Input Signal Out of Range” on your HP monitor while playing Xbox, the resolution or refresh rate that the Xbox is currently outputting is not supported by the monitor. To fix this, you will need to change the display settings on the Xbox.

Here’s how:

  1. Press the Xbox button to open the guide.
  2. Go to System > Settings.
  3. Select Display & sound > Video output.
  4. Under Resolution, select 1080p or 720p. If you’re unsure which resolution to select, go to How to adjust your Xbox One console display settings.
  5. Under Refresh rate, select 60Hz.
  6. Select Restart now to apply the changes.

After you’ve changed the display settings on the Xbox, the message should no longer appear on the HP monitor.

How Do I Fix The Input Signal Not Found On My Monitor?

If you’re seeing the message “Input Signal Not Found” on your monitor, your computer isn’t outputting a video signal. A few different things can cause this, so we’ll go through a few troubleshooting steps to try and fix the issue.

Check cables connections

  • First, ensure that all cables connecting your computer to the monitor are secure. Sometimes a loose cable can cause this problem. 
  • If the cables are all plugged in securely, and you still see the “Input Signal Not Found” message, try restarting your computer. 
  • Sometimes, the video output settings can change, which will fix the problem.

Check your video output settings

  • If restarting your computer doesn’t work, you may need to check your video output settings. 
  • On a Windows PC, you can do this by going to Start > Control Panel > Display. 
  • Under the “Settings” tab, look for the “Resolution” setting. 
  • If it’s set to something other than your monitor’s native resolution, change it and click “Apply.”

Check The graphics card

  • If you’re still having trouble, your graphics card may be the issue.
  • Try opening the case and ensuring that the graphics card is seated correctly in its slot. 
  • If it is, try removing and reinstalling the card drivers.

If you’ve tried all these troubleshooting steps and still see the “Input Signal Not Found” message, your monitor may be the issue. Try connecting a different monitor to see if that solves the problem.

More Questions & Answers

How Do I Change The Refresh Rate On My HP Monitor?

To access the “Monitor” tab, click on the “Monitor settings” dropdown. Click “Apply” once you’ve chosen your preferred refresh rate from the dropdown menu.

How Can I Make My HP Display Run At 60Hz?

Open Display settings by right-clicking on the desktop. Click on Advanced display settings when you’ve finished scrolling. To access the Display adapter properties, go to Display adapter properties and click the Show button. To change the screen refresh rate, go to the Monitor tab and choose the Refresh Rate dropdown option.

Why Is There No Input Signal On My HP Monitor?

When there is a problem with the input device, a faulty cable, or a loose connection, the monitor will often show the message “no signal error.” This error may also be caused by issues with the graphics driver and output resolution.

Why Is My Monitor Getting No Signal?

The monitor no signal problem might be caused by a loose connection between your display and your PC. You should first verify whether your appropriate video cable is securely attached if you notice the “no signal” warning on your screen when running Windows.

Why Is My HDMI Not Working On My Monitor?

Your Android phone or tablet must have the HDMI connection option to connect to a television. Go to Display Entries > HDMI connection under Settings > Display Settings. Enable the HDMI connection if it’s not already.

Why Does My Monitor Say No Signal When HDMI Is Plugged In?

One of the most frequent causes of a monitor reporting no signal is a defective, loose, or incorrectly positioned cable. Checking your DVI, HDMI, or DisplayPort wires is simple: Reconnect all cables once they have been unplugged. Make sure that each one is linked correctly (fully pushed in).

How Do I Reset My Monitor Range?

To begin, do a Windows Safe Mode reboot and choose the monitor’s suggested resolution from the user handbook that came with it.

  • Start Windows in safe mode. “From a black or blank screen” may be found in the section “Start your PC in safe mode with Windows 10.”
  • Changing your screen resolution is the second step.

Why Does My Monitor Say No Signal When HDMI Is Plugged In?

There are a few possible reasons for input signal out of range HP monitor. They are:

  • The HDMI cable is not plugged in correctly. Ensure that the HDMI cable is firmly inserted 
  • The wrong input source is selected. On your monitor, make sure that the correct input source is selected. This is usually done by pressing the input selection button on the monitor itself.
  • The computer’s graphics card does not support HDMI. In this case, you will need to use a different type of cable, such as DVI or VGA.
  • The monitor does not have an HDMI input. Some monitors only have DVI or VGA inputs. In this case, you will need to use a different type of cable.