By Robert K. Mack
Last Updated on July 31, 2022
Last Updated on July 31, 2022
Last Updated on July 31, 2022
Are you having problems with your Acer monitor? Is the screen blank, or does it say “No Signal“? If so, don’t worry – you can fix the problem yourself.
There are some potential ways to fix this problem. They are:
This blog post will show you how to fix an Acer monitor no signal. I will also provide some tips on other additional information. Keep reading for more information.
Acer monitors are some of the most popular on the market, but they can still experience the occasional problem. One such problem is when your Acer monitor displays the message “No Signal.”
There are a few reasons why this might happen:
If your Acer monitor is displaying the “No Signal” message, don’t panic! There are a few simple steps you can take to fix the problem.
There are a few things you can do to check the input settings if there is no signal on your Acer Monitor. To do this!
8. In the “Input Settings” window, ensure that the correct input setting is selected for the Acer monitor. The input setting will be either “Analog” or “Digital.”
If the wrong input setting is selected, the image on the screen will be distorted.
9. Click “OK” to save the changes and close the window.
If your Acer monitor has no signal and needs to be reset, you can use a few methods. Depending on the model of your monitor, some methods may be easier than others.
To do a hard reset on your Acer monitor, unplug the power cord from the back of the monitor. Wait a few seconds, then plug the cord back in. This should reset the monitor to its factory settings.
If this does not work, you can also try pressing and holding the power button on the monitor for 30 seconds. This will also reset the monitor.
To do a soft reset, go into the menu on your monitor and navigate to the reset option. This will reset all the settings on your monitor back to their defaults.
Use the OSD Menu
If you want to reset your Acer monitor without losing any of your custom settings, you can use the OSD menu. To do this, press the menu button on your monitor and navigate to the reset option.
This will only reset the settings you have changed and not all of the monitor’s settings.
Use the Factory Reset Code
You can try using the factory reset code if you can’t find the reset option in your monitor’s menu. To do this, unplug the power cord from the back of the monitor. Press and hold the menu button, then plug the power cord back in.
The factory reset code should be displayed on the screen. Enter this code into the menu and hit enter. This will reset your monitor to its default settings.
I hope the above-described methods will help you fix the “No Signal” issue.
Check the cables and their connection if you are not getting any signal from your monitor.
Test the monitor with another cable or PC if the computer is turned on and the display is still black. This will help determine whether the monitor or another component is the issue.
If you have an Acer monitor and your computer is not displaying a signal on the screen, you may need to restart both the monitor and the computer.
Here’s how to do it:
Sleep mode is a power-saving state typically used when the computer is not in use. It can cause the “no signal” problem on Acer monitors if it is enabled and the monitor is not receiving a signal from the computer.
The “no signal” problem on your Acer monitor could be due to the sleep mode being enabled. You can try disabling sleep mode to see if that fixes the issue. To do this, go to the power options in your control panel and disable the “sleep” setting.
If your Acer monitor is not displaying a signal, you can try resetting the system BIOS to default. This will often resolve the issue and get your monitor working again.
To reset the system BIOS to default, follow these steps:
3. Locate the reset button on the motherboard. This will often be a small red or black button labeled “RESET” or “RST.”
4. Use a small object, such as a paperclip, to press and hold the reset button for about 5 seconds.
Sometimes the Acer monitor’s wrong resolution settings can also be the reason for the “No Signal” issue. You should always keep the resolution right according to your monitor’s capability.
If you still cannot get a signal from your Acer monitor, you may need to replace the cable that connects the monitor to the computer.
Check the cables’ connections on both ends to ensure they are secure.
It is pretty easy to check if your graphics card is securely placed on the slot or not. Here are the steps you need to follow:
If you still cannot see the image on the screen, then it is possible that the graphics card is not compatible with your computer or it is defective. In such a case, you will need to replace the graphics card.
You may update your monitor’s driver if there is still no signal. Updating the Acer monitor drivers is simple and easy. You can either update the drivers manually or automatically with Driver Easy.
Here’s how to update the Acer monitor drivers manually:
Alternatively, you can use Driver Easy to update your Acer monitor drivers automatically. Driver Easy will scan your computer and detect any problem drivers. It then downloads and installs the correct drivers for you automatically.
When your graphics card drivers are back-dated and you have not updated them regularly, there is a huge chance of no signal on your Acer monitor. So, you should update them from time to time.
With that said, let’s get started.
If your Acer monitor suddenly goes black and you see no signal, several potential causes exist. The most common cause is simply that the monitor is turned off. However, if the monitor was on and working properly a moment ago, there are a few other potential causes to investigate.
A cable connects your desktop computer to a display. The display, not the computer, tells us “no signal,” which means we are not receiving any data from the computer. Most of the time, it’s an issue with the setup, the connection, power, or simply a message that appears when the computer is starting.
Ensure your screen resolution and refresh rate are set correctly (if you had them set too high, your monitor might not be able to display a screen). Another option is reinstalling your graphics card’s drivers from the manufacturer’s website.
According to recent research (PDF), a factory reset isn’t adequate since data, including the Google account login token, is left behind. Because of flash memory’s limitations on how frequently a block of memory can be rewritten, the root of the issue, says the Verge,
Power and menu buttons are on the bottom bezel’s right side. You’ll find the power button on the right-hand side of the display.
Acer’s and your computer’s HDMI ports must be connected to each other to work. DVI and VGA video card ports are positioned next to the HDMI port on your desktop computer’s back panel. Ordinarily, you’ll find an HDMI connector on the laptop’s left or right side.
The cable should be replaced if its pins are bent or damaged. Specific vintage monitors have cords that can’t be removed from the back. Next, remove the display cable from the computer’s back panel and reinstall it.
Click on the volume icon on the taskbar and choose “right-click” pick Digital Output Device or HDMI when you open the Playback tab under Playback devices. Right-click and choose “Set Default.”
Removes all installed apps and data, then reinstalls Windows and any software initially installed by your PC’s maker, including trial programs and utilities.
The blue light on your Acer monitor can indicate a variety of issues. If the light is blinking, it could mean that the monitor is not receiving a signal from the computer.
This could be due to a loose cable connection or a problem with the input port on the back of the monitor. If the light is solid, it could mean that the monitor is in standby mode or that the contrast or brightness settings need to be adjusted.
A blinking blue light on your Acer monitor usually indicates something is not working correctly.
Here are some steps to help you fix the problem.
I’m Robert K. Mack a full-time writer and editor in cheif of Tipsmotion. Friends often call me Robo! I’m from Memphis City in the United States. I love fixing Computer Hardware issues.